Skip to main content
Home » Jeep Lighting, Lenses, Bulbs » Light Bars » Quadratec 10" LED Light Bar
« Back to product
I see the harness has two connections; can this wiring harness handle the load of two of the exact same 10" light bars?
Yes, the harness would be appropriate to power quantity two of the 10" light bars. Thanks for your inquiry.
Just purchased the Rugged Ridge tube front bumper for my 04. It has light tabs with a center hole to hole width of 10 inches. What is the distance hole to hole of the mounting brackets.
The bolt pattern for the mounting feet are 12.75".
The 10 degree spot/30 degree combo, do they only turn on at the same time, or can you choose which one you want to use with the switch?
All LEDs in this bar illuminate at the same time.
Will this light fit the Rockhard 4x4 fairlead winch light mount?
Yes, it will fit. The Rigid Industries, KC, and Quadratec 10" LED bars will all fit.
What is the mounting bolt spacing?
The bolt space is about 1.5" from the LED so you would be looking at about 13" from one bolt space to the other.