This locking stereo cover is a great way to secure valuable stereo equipment from the prying eyes of would be thieves. The unique design allows the locking cover to flip up and be stowed under the convenient storage tray.
Constructed from .090” Aluminum with a durable color matched powder coating finish. The cover is secured shut by Tuffy’s exclusive double bitted ten tumbler camlock system. Proudly made in the USA .
This 16-gauge steel, high security glove box is an ideal replacement for the plastic factory glove box. The glove box can be used to secure a number of smaller items.
Tuffy’s Patented latch system allows the glovebox to be latched shut without having to be locked and unlocked each time it is accessed. Proudly made in the USA .
This 16-gauge steel overhead security console has one lockable compartment for mounting a stereo, CB Radio, speaker or other electronic device. The compartment door swings up flush and latches open. The door is secured shut by a double bitted 10 tumbler lock with built in weather seals.
A bolt in stereo mounting bracket makes installing a DIN mount stereo or CB radio a breeze. The innovative sliding design allows access to the levers for removing the Jeep factory tops. Proudly made in the USA .
This fully enclosed 16 gauge steel console insert provides security and convenience, while still maintaining the refined curves of the factory center console. It turns the factory Jeep Wrangler JK center console into a heavy-duty lockable storage area to help protect valuables from thieves’ hands.
Each console features a full length marine vinyl pad for comfort and a removable, internal storage tray to keep smaller items conveniently accessible. Proudly made in the USA .
This 16 gauge steel full console provides over twice as much secure storage than the factory console. A special bracket is included for mounting a stereo, CB or other electronic equipment inside the lockable console with a hole for the CB Mic.
Inside the storage area there is a handy 12 Volt marine grade power outlet and a removable utility tray. Tuffy’s 1/4” thick patented Pry-Guard II latching system secures the lid shut while a gas strut supports the lid when open. Proudly made in the USA .
This heavy duty partition makes organizing all your gear for that expedition a breeze and can be used as a barrier to keep your four legged trail companion off your lap every time the vehicle hits a bump.
The innovative and versatile mounting system allows the partition to be installed and removed in seconds from the 1/8” thick steel brackets mounted to the top of the Tuffy drawer enclosure. Proudly made in the USA .
This heavy duty, high security, 16-gauge steel drawer mounts behind the rear seat in a Jeep Wrangler JK 4-Door and in place of the rear seat in a 2-door. The large drawer slides on heavy duty roller bearings and can be securely locked.
It provides protection for tools, gear, and other valuables. The drawer features an adjustable height mounting system which creates up to 4” of storage under the drawer. The cubby storage in the vehicle floor can still be quickly accessed by removing the drawer. A divider kit is available but sold separately, shown in picture. Proudly made in the USA .
This security deck enclosure creates a large and lockable storage area completely protected on all sides. It works in conjunction with the vehicle rear door and lock.
The lid easily hinges open and is secured shut using an innovative latching system.
The unique lid design is constructed from structural welded steel which incorporates a large weight bearing tray for organizing and transporting items on top.
There are also two large trays on each side above the wheel well for addition storage and organization.
Proudly made in the USA .
This heavy duty locking cubby cover replaces the existing flimsy cover from the factory. Constructed from 16 gauge and 1/8” thick welded steel. It creates secure storage in the hidden floor compartment which is ideal for securing valuable tools and gear.
The unique design features our Pry-Guard locking system with 1/8” thick steel components and a welded continuous steel hinge. The lid also provides a sturdier and more durable deck surface for items placed on top. Proudly made in the USA .
This heavy duty, high security, 16-gauge steel trunk is perfect for Jeepers looking for lockable storage for tools and gear while maintaining the use of their rear seat. The innovative design allows the trunk to be installed with or without the OEM factory sub-woofer without losing valuable lockable space.
Access to the jack and cubby storage is also maintained by the unique mounting system. Proudly made in the USA .
Take your Jeep to the next level with the Jeep parts found on our site. We are a leading Jeep accessories retailer, providing performance Jeep parts to our customers. It's a Jeep thing-and we do understand!We work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & Jeep accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & Jeep accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech Jeep Parts, we have no affiliation with either. [5]
.
