These traditional looking tail lamps have a clean no-nonsense look of original equipment with the custom looks and performance of solid state LED (light emitting diode) technology.
LED lamps provide a brilliant light that outlasts incandescent bulbs and is the new standard in automotive signal lamps.
Our tail lamps are designed to operate with all existing factory wiring harness connectors and will work flawlessly with your existing signal flasher module.
Olympics Jacklite Brackets easily bolt onto any custom Wrangler JK Front Bumpers, which utilize the eight existing mounting holes in the front of the vehicles frame works.
You have a choice of laying your Jack on either of its two sides and fastening it to a variety of predrilled holes in the Jacklite Brackets.
You can install one pair of lights with the Jack, or two pair of lights without the jack.
Olympic has engineered the auxiliary light mounting position to minimizing visually interference from the drivers view. Along with improved night vision, you'll see more of the fender and tire for precise wheel positioning.
They easily bolt into existing mounting holes in the Windshield Hinges.
Enhance nighttime driving and the looks of your vehicle with our custom light mount brackets and your favorite style auxiliary lamps.
Brackets clamp securely behind the grille and provide clearance for virtually any size and brand of lights.
Constructed from 3/16" plate steel with a satin black powder coat finish. Kits include two light mount brackets, mounting hardware and detailed instructions. Made in USA exclusively for Quadratec.
There's a new star on the road, burning 20% brighter and whiter than standard halogen. SilverStar illuminates with a searing intensity, exceeded only by the more expensive High Intensity Discharge lighting.
SilverStars are the brightest street-legal halogen on the road.
Quality made in the USA.
PIAA is proud to announce the newest addition to their bulb line: PIAA's Xtreme White PLUS H13 bulb with a Kelvin rating of 4000K, providing an intense white light with superior performance. Upgrade today! Dual-filament bulb. LH13 is designed to comply with all DOT, ECE and NAFTA regulations World wide application and use. Engineered for sustained performance in applications where a high level of vibration and moisture protection is required.
Our Euro Style Crystal Eyes Tail Lights are built to the highest quality standards and vacuum tested to make sure lenses are air-tight and three-point inspected before leaving production plants. Sold in Pairs.
New from Rampage Products, the L.E.D lightbar adds attention grabbing style and safety to your Jeep®. Available with or without reverse light option, the bar installs quickly and easily with 3M® tape, with no drilling! L.E.D Bar comes in 49 inch size and plugs into existing flat four trailer hitch wiring.
KC HiLiTES is the dominant force in auxiliary and off road lighting! As the original manufacturer of off road lighting, beginning with the Daylighter®, we have established a rock solid reputation for quality and performance.
This new light bar from KC HiLites is a great way to light up the night with two lights for ’07-’09 Wranglers (not included). Light bar easily mounts to the existing hood hinge bolts for a clean and simple installation.
KC FRONT END LITE BARS are a great and simple way to mount additional lighting to the front of your JK Wrangler. They come standard with a fantastic looking textured BLACK POWDER COAT finish. KC Lite Bars for Jeeps are constructed using 1-1/2” O.D. steel tubing with mounting tabs for 4 lights. Installation is simple, bolting up to existing factory holes, so there’s no need for drilling, plus they can be shipped via UPS.
MBRP Inc now offer these cool brackets that mount to the JK front windshield allowing for two more auxiliary lights. Laser cut and formed from heavy gauge material insure a perfect fit every time. Brackets are powder coated black. Each kit contains two brackets.
This cool tubular light bar is constructed with heavy gauge 3" tubing. The mounting brackets are laser cut and formed from 10 gauge material to ensure accurate easy mounting. MBRP Inc. frame mount light bar comes with two mounting tabs and will hold up to 8" diameter lights.
The light bar is pre-drilled to allow for internal wiring of lights. The bumper does not have to be removed for installation. Each unit is powder coated black.
The Pre-Runner Bar is an easy way to add style to your JK, while enhancing its tough, front-end design features. Installation is easy and secure, with NO DRILLING required. Accessory light mounting locations have been provided for a true Baja inspired appearance. Heavy, welded construction and a durable powder-coated finish for a lifetime of good looks.
Take your Jeep to the next level with the Jeep parts found on our site. We are a leading Jeep accessories retailer, providing performance Jeep parts to our customers. It's a Jeep thing-and we do understand!We work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & Jeep accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & Jeep accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech Jeep Parts, we have no affiliation with either.
exclusively for Quadratec.
