Chat with us, powered by LiveChat WARN Hublock Floater Kit 5 on 5.5" for 87-89 Jeep Wrangler YJ with 27 Spline Dana 35 | Quadratec Skip to main content
Home » Jeep Engine & Fuel System » Gaskets & Hardware » WARN Hublock Floater Kit 5 on 5.5"
WARN Hublock Floater Kit 5 on 5.5" is no longer available

WARN Hublock Floater Kit 5 on 5.5" for 87-89 Jeep Wrangler YJ with 27 Spline Dana 35

Description
Maximize wheel-bearing strength with these double Timken bearing designs, which carry the vehicle's load in the center. Axle shafts are now dedicated to only transferring torque while not having to support the vehicle's weight.
Details
These Rear Full Floating Axle Conversion Kits are now available in Hublock or Drive Flange designs. Hublocks can dial out the rear drive line - eliminating wear on the transfer case when flat towing and preventing false miles on the odometer. Superstrong design increases axle reliability and strength by at least 50% while failures in the ring and pinion or differential can be dialed too. New Drive Flange Kit designs add even more strength to the Full Floating Axle Conversion Kits by eliminating the internally splined lockout hubs for full-time engagement. An excellent choice for those not towing their vehicle.
Installation Notes
Installation Difficulty:
Skill Level 3 IconLevel 3Advanced
Installation Time: 2-4 hours
Parts Included

2 Shafts
2 Hub Bodies
Bearing Set
Gasket Set
Hub Lock Out Set

  • Jeep Wrangler (YJ)

  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)

WARN Hublock Floater Kit 5 on 5.5" Options

Part NumberCatalog #OptionPrice