|
 |  |
| Home » AEV - American Expedition Vehicles |
AEV - American Expedition Vehicles
|
|
|
Utility, style, and most of all...Unique.
After countless hours of design and years of development, this ultimate conversion for all 1997-06 Wranglers is now the hottest do-it yourself conversion that you can complete yourself at home.
This complete and clever design takes about 60 hours of your time to complete with basic skills and tools.
All steel body components come e-coated for maximum corrosion protection and feature quality stampings and are made in USA.
|
AEV Suspension, Built to the Nth Degree
|
|
AEV's ProCal Module is a hand-held powerhouse!
It provides users with a quick and easy way to make a variety of useful recalibrations to their vehicle's computer.
Topping the list is its ability to correct for changes in tire size.
|
|
|
The AEV / Nth Degree Front Steer Kit greatly improves on road handling and ride quality.
For use with 3-4" Lifts.
This kit is included in the 3" Premium Lift Kit from AEV / Nth Degree.
|
|
|
AEV has set out to engineer what should prove to be the best all-around performing system in the aftermarket.
|
|
|
AEV is proud to announce the re-release of the popular Nth Degree Long-Arm suspension system.
Designed by former Jeep suspension engineer, Jim Frens, the Nth Degree Long-Arm system has established its remarkable reputation by pushing the TJ's trail capability & highway drivability well beyond after market standards.
|
|
|
These urethane coil spring spacers fit above your springs and provide added ride height to the front and the brackets reposition the top of TJ rear springs rearward on the frame and square them to the axle, providing the only available solution for correcting spring and bump stop alignment on lifted TJ Wranglers.
|
|
The GyroJoint is a ball-in-socket design that permits zero-bind flexibility and road/trail-taming isolation in the same control arm..
an industry first and still exclusive to Nth longarms.
It combines the flexibility and durability of a rod-end style joint with the cushioning 'give' normally lost when the stock bushings are replaced with rod-ends or ball-and-race designs.
|
|
Protect your Jeep Wrangler while on the trail with AEV / Nth Degree Tummy Tuckers, Skid Plates, Front Sliders & Rear Sliders.
|
AEV Featured Products for your Jeep Vehicle
|
|
American Expedition Vehicles (AEV) is proud to announce its JK V8 HEMI Builder Kit.
This comprehensive package has been designed for installers familiar with engine swaps and sets new standards for OE appearance and compatibility while also eliminating the headaches of missing or mismatched parts, so common with other "kits".
|
|
|
New from AEV this Snorkel Kit for '07-'09 Wranglers is the perfect way to keep your JK breathing better. This kit is designed to fit through the side vent on the Heat Reduction Hood or with use of the adapter kit can be fitted to your factory JK hood. Attaches to your stock air box with little modification.
|
|
With superior craftsmanship, the AEV Front Bumper incorporates stamped and welded steel construction that's the new benchmark in quality and design. With a winch mount tucked neatly between the frame rails, this bumper is fully airbag compatible and offers protection like no other.
Winch Mount & Tow Loops included.
The optional Bumper Skid available separately.
|
|
|
Overworked engines require increased air flow to reduce power robbing heat.
The AEV Heat Reduction Hoods feature thick steel construction with e-coating and come ready-to-paint.
The engineered design allows for mass air circulation while setting a new standerd in vehicle styling.
Heat Reduction Hoods include center mesh vent areas while the 07-08 versions include additional side mesh vents.
Simple direct bolt-on installation with no required modifications.
Made in USA.
|
|
AEV Bridger Wheels boast attractive, durable powdercoat or Chrome Plated finishes.
Features include durable cast aluminum construction, logo center caps, hubcentric machining and recessed valve stems.
AEV wheels are specifically designed and engineered for use on Wrangler vehicles yielding proper wheel beairng loads and clearances for brake rotors, steeing, fender flare widths and suspension components.
|
|
|
AEV Pintler Wheels boast attractive, durable metallic gray or silver powdercoat finishes.
Features include AEV center caps, hubcentric machining and recessed valve stems.
AEV wheels are specifically designed and engineered for use on Wrangler vehicles yielding proper wheel bearng loads and clearances for brake rotors, steeing, fender flares and suspension components.
|
|
AEV Pintler Beadlock Wheels boast attractive, durable metallic gray or silver powdercoat finishes.
Features include AEV center caps, hubcentric machining, toothed positive lock beadlock ring and recessed valve stems.
AEV wheels are specifically designed and engineered for use on Wrangler vehicles yielding proper wheel bearng loads and clearances for brake rotors, steeing, fender flares and suspension components.
|
|
|
Run bigger rubber with less suspension lift.
This ultimate upgrade for all '97-06 Wranglers makes plenty of clearance for 34" tires with no lift!
Add a 3" lift and run 37" tires!
Provides an ultra low center of gravity for greater safety and vehicle stability while creating a unique and balanced look.
|
|
On tough trails the Jeep® Wrangler's rear corners are always susceptible to damage.
AEV's stamped steel corners are available for both 2-door and 4-door models, and because they are stamped, they fit both models perfectly.
|
|
The AEV Jack Base for 07-08 Wrangler provides 3-1/2 inches of added lift height to the stock “scissors” jack. The increased base width enables 35” and even larger tires to be changed with ease and stability. Also doubles as a safety wheel chock. A must-have for any serious off-road enthusiast.
|
|
AEV's CHMSL is designed to replace the factory unit that often gets blocked or removed when adding larger tires. This CHMSL is designed to work with all AEV wheels and most factory five spoke wheels. The hole pattern will accommodate 5x5.5, 5x5 and 5x4.5 wheel bolt patterns. Long life SuperBright LED's are directed in three different directions ensuring that other motorists will see you quickly.
|
|
|
We originally conceived this little gem to compliment our XJ rear bumpers. It quickly found its way onto everything from the Brute to trailers. Makes an excellent choice for anyone needing to locate or re-locate a license plate. The unique design uses three SuperWhite LED’s to produce a very bright white light. LED’s will last as long as the vehicle and draw virtually no power. Kit includes a powdercoated 14ga steel bracket, LED lamp and rivets for an easy installation.
|
|
AEV Lifestyle
|
|
For years our customers have requested that we produce a line of AEV apparel and hats.....and here they are! These t-shirts and sweatshirts are made from the finest American Apparel garments and are sure to turn heads. Get yours today!
|
|
|
Hardtop Removal
Rugged Ridge Modular
HD Front Bumpers
Corbeau Seats & Harnesses
Truck Parts
|
Privacy Policy | Terms of Business | Shipping Policy | Contact Us | Site Map | About Us
©1995-2009, Quadratec Inc. All rights reserved.
 | |
©1995-2009, Quadratec, Inc. All rights reserved. This entire site with its content and parts is copyright protected. All images are invisibly watermarked and cannot be used without explicit agreement from Quadratec Inc.
High Quality Jeep Parts & Jeep AccessoriesTake your Jeep to the next level with the Jeep parts found on our site. We are a leading Jeep accessories retailer, providing performance Jeep parts to our customers. It's a Jeep thing-and we do understand!We work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & Jeep accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & Jeep accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Corporation. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Corporation. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech Jeep Parts, we have no affiliation with either.
[4]
|
|
