« Back to product
Delano J.
Has anyone been able to find the seal for the rear door surround? JL been out 4yrs, can't still expect ppl to spend $600 for $.25 worth of foam
No, unfortunately Jeep still is not servicing the seals and gaskets from the soft top hardware
Adam G.
I bought a bestop bikini top for my 2019 JL Unlimited Rubicon. I didn't realize that it requires these door surrounds. What's the purpose of these door surrounds? They're awfully expensive.
Door Surrounds are factory equipment that are provided with soft top models. For the bikini the door surrounds are an attachment point to that provide full coverage (including the gap between the doors and the sport bar). Without the surround, the bikini would need to attach to the sport bar and a sizeable gap would be overhead when the doors are on.
Glenn G.
Is there anyway to get the gasket pictured above that is in between the upper and lower door surround?
Unfortunately at the moment Jeep is not selling that rubber seal that sits between the upper and lower sections, separately.
Michael O.
I have a 2018 JLU with a hard top, but got the dealer to include a soft top. Unfortunately the soft top did not come with all of the hardware and the mounting brackets--just the soft top and the doors. Does Quadratec sell a kit where I can get all of the hardware I'll need together in one package to install my soft top?
No unfortunately, the soft top hardware is not sold in a kit at the moment. The parts to complete the top can be found here : Soft Top Hardware Parts
Andre M.
I am looking for the bracket the is used to secure the top to the pillar and the two screws that come with it. Are those available? It’s shown in the 3rd or 4th photo. Thanks.
You have to purchase this as a kit. The other parts are not available separately.
Stephen G.
I need just the gasket seal that fits between the pillar and upper surround. Do you sell these?
The gasket that is on the rail is found in #68430143AA. You can use that for the surround by trimming it if needed.
Terry J.
Are the shoulder bolts included that connect the pillar to the top surround bar? Is the seal between the pillar and the surround bar included? Also, what screws are used for the clamps?
The brackets are installed at the factory, 2 screws are supplied to connect the two halves together, seals and gaskets are included, the only other parts that you will need are the thru-bolts #06512163AA to attach them to the sport cage.