Reviews for Quadratec Tow Hitch Wiring Harness for 18-24 Jeep Wrangler JL
The wiring harness is very well made. All you need to do is follow the instructions. I would add a comment to the instructions that the holes on the cross member are on the top. Also if you have to slide along the ground as I did 2 hours is more realistic. Other than that, a great product. I saved $500 not having the dealer do it.
Very simple with great in-color picture instructions, very well built and nice quality. Works awesome
Easy install, well made harness with pre-attached clips to mount the harness directly where the factory harness would go. I went with this option because of its price and because the kit comes with wire loom already installed. Good quality and worked well. Just took my time and routed the wire neatly along the frame away from the exhaust. Took me about an hour to install.
Excellent wiring kit. Simple plug and play. Installed easily on a 2DR Rubicon. Just follow the routing instructions and secure it along the way. Take your time and do it right.
Nice wiring kit. Easy to install, as everything is plug and play, other than having to run the harness to the battery. (I'm not sure why power could not be obtained from the 12v accessory socket in the rear of the Wrangler? Would make the wiring much easier.) Overall, good value.
Fair prices for good product.
Easy install. About an hour and change taking my time. Routing the wire to the battery was a piece of cake. I used a piece of 12 gage electrical wire to fish it to the engine compartment.
Plug & play
Looks good
The instructions were somewhat clear. Having the pre-installed cable tiedowns I thought was nice but they too small to fit holes in the frame of my 21 jeep wrangler. The routing was not clear enough the place indicated for the zip ties were not there but i managed to eventually find a route that worked. I think each jeep model has to be looked at because things may not change much on the outside but beneath it there is unaccounted for movement