Reviews for Crown Automotive 52018177K Complete OE Exhaust Kit for 93-95 Wrangler YJ with 2.5L 4 Cylinder Engine
Complete system
Perfect fit! All the pipes were bent without the crinkles at the bends which was a concern looking at the product pictures. The kit was short one clamp, and another was a 2” and would not fit. Also I had to trim off about 2” - 3” off the CAT to make it fit inside the muffler. Overall a great product.
Great fit and easy install.
Fit great. Had to cut one piece a little shorter and one clamp was small.
I like that this is a complete set. No piecing things together.
This project took care of my problems...loud worn out exhaust and the fumes wafting into the jeep. This was an easy afternoon project. Make sure you have extra clamps this kit is short one and one they gave me was the wrong size. The pipe on cat is too long, had to cut off about 2" sounds great! No more ear plugs.
Removed the old rusted through system and overall satisfied with this complete exhaust kit. Minor trimming needed to make fit.
not so bad had to make a cut on the catalytic converter to make it a little shorter for right fitment also on a 95 you need 3 exhaust pipe clamp not 2.
Bought this exhaust setup to replace my rusted, wore out stock set up on my 1995 Wrangler. This shipped direct from factory and was slower than slow getting here. As others have noted, you will need to get two additional clamps as this kit is missing a few. You'l also have to buy new bolts to connect the down pipe to the manifold since it doesn't come with those either. However, this kit is great because it takes the guess work out of trying to build a setup from scratch (unless you want a more custom sound). Also, the piping on the CAT and the muffler are too long and cause there to not be enough room for one or the other. We ended up have to cut a few inches off the CAT to make everything fit properly. Besides those minor issues, we were able to bolt it up in an afternoon. It's been on my rig for weeks now and I love it. It sounds great, and it passed Delaware emissions! You won't regret getting this kit as long as you anticipate the issues I noted.
Catalytic Converter openings are a little to large. Muffler openings are too small and pipes won’t fit in holes. We need to modify to work. Short on clamps. About what to expect from Crown.