Reviews for Crown Automotive RT31015 Stainless Steel Brake Hose Kit for 87-06 Jeep Wrangler YJ & TJ; 84-01 Cherokee XJ and 93-98 Grand Cherokee ZJ

Yes

Vehicle: 98 Grand Cherokee ZJ with a 2.5" Rubicon Spring spacer lift. Okay. They fit. However. The front hoses DO NOT fit the same way the O.E. do. They had to be routed "up" the back the caliper before they would attach. And since they fit up to a 6" lift there was the need to route and secure them accordingly. The rear hose block is off by 90 degrees. If I tried to mount it the "proper" way the block would be hitting the bleeder screw. The rear brake lines had to be bent up, and then it fit. I understand that the kit fits 41 years worth of Jeeps and that they are made for the most "common" configuration. However, the lack of any instructions include with he hoses has led to a new bald spot on the back of my head from all the scratching while trying to figure out how to make it work. Photos will be attached at some point in time.

Not happy. These cables are extra long and could not get them to stop leaking. Part of the problem is that everything is separate. Seemed that I could not get the blocks tight enough.

Poor quality for the price. Leaked when first installed, had to file the blocks down and buy my own washers “gaskets”. And within 3 months the rear it blew out on the fitting above the axle block. Junk. Most aggravating purchase I’ve ever made.

First set leaked through the braided line. The next set juts blew out at the upper fitting!!!
total junk!