« Back to product
Derek S.
This appears to be the plug on the hardtop not on the tub. I need a female end on the tub to match up to the male end of the hardtop. Which part do I need for that?
![](/sites/all/themes/quadratec/logo.png)
This is the body side plug to be used with an early model hardtop 97-02 on the existing 03-06 wiring
PHILLIP C.
06 WRANGLER UNLIMITED. HARDTOP HAS NO PIGTAIL FROM TUB TO WIPER/DEFROSTER/WASHERCONNECTION. WHAT DO I NEED?
![](/sites/all/themes/quadratec/logo.png)
If the wiring is present along the tub rail then this will finish the end of the electrical and connect to the hardtop. If the entire wiring assembly (including dual pump reservoir) is not present then you will have to customize wiring as Jeep discontinued those parts a couple years ago
Michael F.
i have a 04 wrangler that had a factory hard tops got it with a soft top.i bought a hard top off a 99wrangler the plugs on the top don't match.is there away to make it work
![](/sites/all/themes/quadratec/logo.png)
#5013984AA is the body-side hardtop plug and wiring that should match the plug found on the 99 hardtop.
Ronald H.
is this the wiring for the rear window defroster and windshield wiper
![](/sites/all/themes/quadratec/logo.png)
This is the plug end found on the wiring that runs along the tub, which plugs into the factory hardtop. The remainder of the wiring is no longer available from Jeep.