Reviews for Crown Automotive RT21036 Drop Pitman Arm for 07-18 Jeep Wrangler JK

Good item, but make sure you have a strong impact and also a pitman puller. Be careful with the threads

Does not fit like stock. This new pittman arm is thicker than stock, no doubt making stronger and better for offroad purposes, but, when it is I stalled completely due to the thicker material the nut that holds it on doesn't quite make it over all the threads. Kind of a sketchy setup if you asked me. Contemplating returning this Pittman arm as it seems like they just didn't cut the hole with the splines quite right.

Had an issue with installation since this has a thicker connect point to the gear box. Wouldn't set all the way causing only 2 or 3 threads to be used and no lock nut to attach. Removed and ordered a different drop arm that was significantly more expensive.

I have a 2012 JKU and have used Quadratec for most of all my upgrades and mods.

This pitman arm product Fitment isn't a good fit or possibly I received a defective part... But after all said and done it had to be modified to fit. Didn't care for this product so took it off and in the metal junk pipe it went.
All in all spend the extra $30s or so for a better quality product.