Reviews for Quadratec LED Tail Light Kit for 97-06 Jeep Wrangler TJ
Easy installation and they look great!
NOTE: When testing during installation these will only work if bolted on. Do not try to test them sub-installed and resting on the bumper. The Jeep IS the ground wire! The lights are definitely brighter than I am.
Super easy to install and a great look on my 04 Jeep Wrangler TJ/LJ!
These tail lights are a huge improvement over the stock tail lights. They replace the factory tail lights with no modification needed. They are compatible with rear tail light guards for TJ's. If you have tail light guards and want to keep them with these LED tail lights you will need to replace the factory bolts with ones that are 1/4" longer. This will give you the ability to maneuver the tail light housing, wires, and light guard for a secure fit.
These were easy to install once we figured out how to mount them with the euro tail light covers. We used carriage bolts to hold the bolt in place so we could tighten them down from the other side and drilled the holes out to 1/4” in the body. The carriage bolt also allowed us to slide the lights into the covers with the LED panel on instead of working around the LED panel. Super easy install and very bright! Looking forward to using the reverse lights at night as well.
Plug and play. Very bright and look great. Highly recommend.
Easy install - work great with provided flasher module. A subtle safety/style update after my stock units rusted out internally. Would recommend!
Just installed these on my 2004 TJ.
Took about 40 minutes because the passenger side is a bit difficult.
I pulled the plastic inner fender cover out of the way and used a fish wire to guide the new wires down to where i could plug them in to the connection.
They work great and i really like the bright backup lights.
Put on sons jeep plug and play.
These look awesome and light up the night for those looking to keep the factory taillight look. Installation is pretty straight forward, and can be done with simple hand tools. The passenger side gave me some trouble, but that was due to the factory harness being INSANELY short and the fuel pump being smashed into the back of the TJ tub. I pulled the passenger rear tire, unbolted all of that nonsense, and the taillight went in easily.
Well packaged
Good quality
Good instructions
(2006 TJ Sport)
Driver side was simple, as the plug could be pulled right out of the hole (Took about 15 minutes)...Passenger side plug was much more difficult to get to and it was very difficult to separate the old plug to make way for the new one...Hard to find and very little room for hands and/or tools...(Took about 1:45 hrs)