Skip to main content
Home » Jeep Driveline » Clutch » Clutch Hoses » Advance Adapters Slave Cylinder Hose Kit
« Back to product
Will this fit a 92 YJ with a 4 cylinder?
Yes, it will. Thanks for your inquiry.
i have a 1993 cherokee with a quick release how would I attach that to the line? also does the flare fitting fit the stock master cylinder or would I have to make some modifications?
This kit is designed for the 1993 slip lock connection fitting on the stock internal release bearing. We have added the necessary fittings for the 1993 slip connection fitting replacement. Installations of this kit does require the pressure side of the hose to be cut with a tubing cutter. Once the pipe is cut, install the new hose fitting and then use a pipe flaring tool to double flare the pipe and install the new fitting in place like shown below. Once the new fitting is installed use the union fitting and the -3 fitting to connect the new hose. Thanks for your inquiry.
716130IR-93, will this master cylinder to internal slave cylinder hose kit work for a 1993 Jeep Cherokee? Is everything needed supplied?
It will fit Cherokee models as well. NOTE: Please down load the tech data. 1993 Jeeps kit will require the pressure line to be cut and a new brake fitting (male 7/16-24 inv) installed with a flaring tool. The installer is responsible for these parts and tools. Thanks for your inquiry.
Will this work as a replacement for a 1993 Jeep Wrangler YJ with a 4Cyl 2.5L Do I have to remplace the Slave Cylinder and the Master Cylinder also? I mean, both are working well and seem in good shape. I understand that dealer isn’t selling the OEM, ¿right?
Yes you can use this as a replacement and keep your original master and slave cylinder in place.
Will this work as a replacement for a 1987 Jeep Wrangler YJ with a 4.2L engine?
Yes it will
I think I need to put a new line from the master cylinder to the clutch slave. How long is this line?
This is a 42" line
Will this work with a 1992 Jeep YJ 2.5l (AX-5 Manual Trans 5 Speed)? Not sure if I have an internal release throwout bearing. Thanks.
Yes, it will. The AX-5 used an internal slave cylinder until 1994. This will work for your application.