Reviews for Quadratec 6" Fog Light Wiring Adapter Kit for 97-06 Jeep Wrangler TJ & Unlimited

Great product. Works as described. Easy for anyone to install and a much needed when converting the original fog lights to led and still being able to utilize the headlight stalk in car to turn fogs on.

I have an 06 TJ and I recently installed a new front bumper with fog lights. Rather than run the new fog light wires to the battery and install a new switch, I decided to buy the fog light wiring adapters so I could just plug the new lights into my factory plugs and use my factory switch. The adaptor worked perfectly and made the installation SOOOO much easier!

Perfect adaptation for my Rigid fog lights.

Purchased for an 04 Jeep Wrangler TJ rubicon to connect factory fog light connector to rigid fog lights. They plugged in and worked no problem. I have not submerged them yet so don’t know how they’ll hold up going through water holes.

Perfect fit

Needed these to hook up my KC Daylighters to the original harness on my Jeep.
Worked perfectly. The Daylighters work with the original fog light switch.

These work great for their purpose.

Used these to splice in an existing set of KC lights that were on a bumper that I purchased from a friend. Worked very well and appear to be of at least OEM quality.

Did the trick to make my rigid industries dot/Sae fogs plug and play.

Be sure you are getting the right part!!! This part (97109.0906) DOES NOT fit the 05-06 TJs. You must have the unlisted part (97109.0916). For some reason, JEEP reversed the OEM connector on the JEEP body, so you must have the one with the gray female plug on one end and the Deutsche connector on the other end.