« Back to product
Edward H.
what is the extended and collapsed length of this drive shaft
![](/sites/all/themes/quadratec/logo.png)
This drive shaft will bottom out at 14.25” and extend out to 17” center of u-joint to center of u-joint, safe usable range is 15” to 16” Thanks for your inquiry.
Jason M.
Does this have the X-spline? When speaking to Shawn Woods he told me that anything under 16.5 inch needed to use the S-spline.
![](/sites/all/themes/quadratec/logo.png)
That part will use the ( S ) standard spline its natural ride length is 15.5”. Thanks for your inquiry.
Kenneth S.
Will this work on a stock suspension with a SYE installed?
![](/sites/all/themes/quadratec/logo.png)
No unfortunately these Tom Woods shafts require a lift ( 2"-6" ) and SYE for proper fitment on the TJ Wrangler
Daniel G.
Hi there is this good for a 4" lift
![](/sites/all/themes/quadratec/logo.png)
Yes this is good for 2-6" of lift with an SYE kit installed
Joselito U.
Is this compatible on advance adapter 1350 yoke
![](/sites/all/themes/quadratec/logo.png)
No this shaft uses 1310 size U-Joints
Robert W.
Will this drive shaft work with SYE and a 3" lift?
![](/sites/all/themes/quadratec/logo.png)
Yes, That is the intended use for this
Matthew T.
Will this work with an automatic transmission?
![](/sites/all/themes/quadratec/logo.png)
Yes, it will
Evan L.
What size u joints are on this
![](/sites/all/themes/quadratec/logo.png)
This driveshaft uses 1310 u-joints
Eric R.
What size lift is this intended for
![](/sites/all/themes/quadratec/logo.png)
This will work with up to 6" lifts