« Back to product
Loc T.
Hi, I have a 05 Wrangler TJ, all original, just wondering these shocks are fit for my Jeep ?
Thanks.
![](/sites/all/themes/quadratec/logo.png)
The first option selection in the drop down menu for stock ride 0" lift height to 1.5" of lift will be a compatible for your stock Jeep suspension. Thanks for your inquiry.
Kevin H.
I have a black diamond 3in lift. Will these shocks be at their limits. Would 3-6 in shocks be a better choice or just a stiffer ride. 2003 tj
![](/sites/all/themes/quadratec/logo.png)
2-3" selection would be correct unless your lift was 3.5" and greater. Thanks for your inquiry,
Jacinto R.
This fits on May TJ 06 6” lifted
![](/sites/all/themes/quadratec/logo.png)
Yes, if you select the correct 6"-8" lift range. Thanks for your inquiry.
BRYANT R.
Hi I have a 98 XJ and I have a 3.5 in lift what shock will be best for the my jeep and I do most road driving to commute to work.
![](/sites/all/themes/quadratec/logo.png)
16116-0412 called out for 3.5-4" of lift would be correct for your application. This Hydro shock will have better road manners for daily driving than a Nitro shock will for most drivers. Thanks for your inquiry.
Design Builds S.
Are mounting hardware and boots included in this kit
![](/sites/all/themes/quadratec/logo.png)
Yes, both are included. Thanks for your inquiry.
Lance B.
I have a 2006 Rubicon Unlimited that has a Rubicon Express lift installed by the previous owner. My front springs are 15 inches and my rear springs are 11.75 inches; according to charting, this would translate to a 3 inch lift. The Maximum Duty Hydro 7.0 Shock Kit has a choice of sizes 2-3 or 3-4.5 inches of lift. Which would be the better choice? The existing shocks are all seeping and unreliable and am not confident that measurements from these would be valid.
![](/sites/all/themes/quadratec/logo.png)
If most of you driving is on road, the 2-3" sizing should be more appropriate. If your driving demands more shock travel, go larger with appropriate extended bump stops. Thanks for your inquiry.
Roger B.
For a 00 Wrangler with no lift, used for cruising, not very much off road at all, would you recommend the Hydro or Nitro shocks?
![](/sites/all/themes/quadratec/logo.png)
Hydro will be the best for daily road comfort.
Chuck W.
The installation instructions call for using a vice to put the rear shock mounting bars into the bushings. Do the rear shocks come with the mounting bars?
![](/sites/all/themes/quadratec/logo.png)
The bar pins for shock mounting are included. Thanks for your inquiry.
Edwin O.
I have a stock '99 XJ with no lift kit installed. What size shocks would I need?
![](/sites/all/themes/quadratec/logo.png)
You need the shocks for 0-1.5" lift height.
ALVIN O.
replacing shocks on my 1999 jeep wrangler I don't know what lift it has on it but the shocks measure
Front 14 1/2 - 24 1/8
rear 14 13/16 - 24 7/8. would these work or do you have some that would work
![](/sites/all/themes/quadratec/logo.png)
Based on your measurements you have 3.5-4 inches of lift. Part# 16116.0412.14 would be the appropriate shock kit.