Crown Automotive J5460089 Wiper Switch for 68-82 Jeep CJ-5, CJ-6, CJ-7 & CJ-8 Scrambler
Quadratec Part #:
55312-000
Crown Automotive Part #:
J5460089
Description
The windshield on early CJ's is small enough, and if your wiper system is not working properly then your visibility is even further degraded. The Crown Automotive Wiper Switch is a direct replacement for the failing factory unit. Weather your arms are not sweeping smoothly or your pump is no longer working properly, the switch may be the culprit. This 5-blade switch is for Jeeps without intermittent wipers. Connections for the factory wiring are on the back for the motor, power and pump. As long as your factory wiring is still good, then there is no splicing or new wiring needed for installation. Simply connect the Jeeps paddle-connectors to the blades.
Details
Original Replacement Part: Made to factory standards for fitment and ohm impedance, so there are no modifications needed to the electrical system or the dash board.
3-Wire Motors: Replaces wiper switch where wiper motor has 3-wire connection
Functionality: Depress shaft to actuate washer pump, does not work on systems with intermittent wipers
- Shipping Weight: 0.1lb
- Shipping Dimensions: 3in x 3in x 3in (L x W x H)
Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
- 1978 Jeep CJ-5
- 1977 Jeep CJ-5
- 1976 Jeep CJ-5
- 1975 Jeep CJ-5
- 1974 Jeep CJ-5
- 1973 Jeep CJ-5
- 1972 Jeep CJ-5
- 1971 Jeep CJ-5
- 1970 Jeep CJ-5
- 1969 Jeep CJ-5
- 1968 Jeep CJ-5
Jeep CJ-6
- 1975 Jeep CJ-6
- 1974 Jeep CJ-6
- 1973 Jeep CJ-6
- 1972 Jeep CJ-6
- 1971 Jeep CJ-6
- 1970 Jeep CJ-6
- 1969 Jeep CJ-6
- 1968 Jeep CJ-6
Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
- 1976 Jeep CJ-7
Jeep CJ-8
- 1982 Jeep CJ-8
- 1981 Jeep CJ-8
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Wiper Switch Reviews
William P.
10/27/2021
I agree with Juan S
I had same problem. fell apart. Quadratech sent me another one and that was bad to Crown QC not so good . Tried the omix switch was bound up and shaft looked like was grounded. Quadratec sending me another Crown switch NO QUESTIONS ASKED this is going above and beyond Awesome Customer service
Troy D.
9/17/2021
Worked great
Ryan S.
11/5/2020
Good quality
