Bushwacker 10903-11 Extend-A-Flares for 87-95 Jeep Wrangler YJ without Step
Popular Similar Items
Details
Installation Notes
Installation Difficulty:
Level 3AdvancedTools Needed
Jack and Jack Stands
Electric Drill
11/64 Drill Bit
1-1/8 Hole Saw
Pop Rivet Gun
Grease Pencil or Marking Pen
Tape Measure
Phillips Screw Driver
Wire Crimper
Wire Strippers
Red Oxide Primer
Installation Time: 1-3 hours
Parts Included
Front Driver Side Flare
Front Passenger Side Flare
Rear Driver Side Flare
Rear Passenger Side Flare
- Color: Black
- Size: Wide
- Style: Factory
- Material: Plastic
- Shipping Weight: 21lb
- Shipping Dimensions: 52in x 20in x 20in (L x W x H)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
James C.
Are these paintable fenders? I have a 1992 Jeep wrangler sand beige and would like to paint them the same color as the body.
Yes, they are. If paint is desired it must be done prior to installing flares on the vehicle clean outer surface with a good grade degreaser. Do not use lacquer thinner or enamel reducer as a degreaser. Wipe outer surface thoroughly with a tack rag prior to paint. Paint flares using a high quality enamel, or polyurethane automotive paint. (Application of a primer coat is optional) If painting edge trim (not recommended), use a flex additive. Thanks for your inquiry.
Mike J.
How wide are these flares?
Front Flare Height (inches) 4.75
Front Flare Tire Coverage (inches) 6.00
Rear Flare Height (inches) 5.00
Rear Flare Tire Coverage (inches) 6.00