Skip to main content
Home » Jeep Armor & Protection » Skid Plates » Bumper Skid Plates » TACTIK 3mm Front Skid Plate

TACTIK 3mm Front Skid Plate for 07-18 Jeep Wrangler JK

TACTIK 3mm Front Skid Plate for 07-18 Jeep Wrangler JK
TACTIK 3mm Front Skid Plate for 07-18 Jeep Wrangler JK
Quadratec Part #: 12500-0231
PDF Logo Install Instructions
Installation
Instructions
4.625
8 customer reviews
4 questions answered
Description
Serious protection from trail obstacles & road debris requires a heavy-duty product. The all-new Tactik 3mm Front Skid Plate is precisely the tough product you need for your Jeep Wrangler JK. Made from 1/8” thick precision laser cut steel. Covered with a rugged, textured black powder-coated finish providing lasting protection. Installation is an easy bolt-on setup - no drilling required! Covered by a 1-Year Limited Warranty.
Popular Similar Items
Details

Easy Install: The simple bolt-on installation saves time and requires no drilling!

Serious Protection: Made from 1/8” thick precision laser cut steel.

Long-Life: Covered with a rugged, textured black powder-coated finish providing lasting protection.

Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate
Installation Time: Less than an hour
Installation Instructions
PDF Logo Install InstructionsInstallation
Instructions
Parts Included
  • Front Skid Plate
  • Hardware
  • Armor Type: Bumper
  • Material: Steel
  • Shipping Weight: 20lb
  • Shipping Dimensions: 38in x 12in x 5in (L x W x H)

  • Jeep Wrangler 2-Door (JK)

  • 2018 Jeep Wrangler 2-Door (JK)
  • 2017 Jeep Wrangler 2-Door (JK)
  • 2016 Jeep Wrangler 2-Door (JK)
  • 2015 Jeep Wrangler 2-Door (JK)
  • 2014 Jeep Wrangler 2-Door (JK)
  • 2013 Jeep Wrangler 2-Door (JK)
  • 2012 Jeep Wrangler 2-Door (JK)
  • 2011 Jeep Wrangler 2-Door (JK)
  • 2010 Jeep Wrangler 2-Door (JK)
  • 2009 Jeep Wrangler 2-Door (JK)
  • 2008 Jeep Wrangler 2-Door (JK)
  • 2007 Jeep Wrangler 2-Door (JK)

  • Jeep Wrangler Unlimited 4-Door (JK)

  • 2018 Jeep Wrangler Unlimited 4-Door (JK)
  • 2017 Jeep Wrangler Unlimited 4-Door (JK)
  • 2016 Jeep Wrangler Unlimited 4-Door (JK)
  • 2015 Jeep Wrangler Unlimited 4-Door (JK)
  • 2014 Jeep Wrangler Unlimited 4-Door (JK)
  • 2013 Jeep Wrangler Unlimited 4-Door (JK)
  • 2012 Jeep Wrangler Unlimited 4-Door (JK)
  • 2011 Jeep Wrangler Unlimited 4-Door (JK)
  • 2010 Jeep Wrangler Unlimited 4-Door (JK)
  • 2009 Jeep Wrangler Unlimited 4-Door (JK)
  • 2008 Jeep Wrangler Unlimited 4-Door (JK)
  • 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
Review Summary
4.625
Based on 8 reviews
Shared Media
4 Photos
Questions
4 Questions

Customer Submitted Photos

Share Another Photo

TACTIK 3mm Front Skid Plate Reviews

Charles S.
8/19/2023
5

Fits well and is compatible with the Quadratec QRC Winch Ready front bumper (Quadratec Part #: 12057-0120). I recently asked about compatibility and Quadratec stated it would not fit. Well, as it turns out, I forgot I ordered one of these on special, so I took some measurements and did a test fit. It works!

I'll hopefully be putting it to the test at Crawl of the Ozarks soon, and seeing if it works when I install the Swayloc next week (fingers crossed).
Benjamin C.
7/10/2023
5

Very easy to install. Very good quality for the cost. Looks great!
Jason B.
5/10/2023
5

Simple bolt on

Questions

The instructions say torque to specifications, what are the torque specifications for the 6 bolts provided?
The torque spec we are speaking about is the factory torques spec for the front sway bar bracket to frame, this torques is 125 ft-lbs. per all other hardware should be torqued to 55lbs for all bolts.
Will this work with the Havoc front bumper?
We have not tested it, though the 3mm Tactik skid is fairly low profile where if your chosen aftermarket bumper's lower surface does not sit too far below that of that stock bumper there could be enough room for an unmodified fit. If the Havoc bumper is 2-4" below a factory bumper specification the tolerance may get extremely tight and require some trimming to make both work. Thanks for your inquiry.
Will this be compatible with the quadratec QRC front bumper?
No, unfortunately there is not quite enough clearance for them both to be used. Sorry for the inconvenience. Thanks for your inquiry.
Look Who's Talking
Review Summary
4.625
Based on 8 reviews
Shared Media
4 Photos
Questions
4 Questions
Our Experts Recommend